product number: BS-2011
product name: Concrete Ultrasonic Testing
Ultrasonic non-destructive integrity testing made easy
An essential tool for investigating the structural integrity of a wide range of materials:
● Concrete
● Ceramics and refractories
● Timber
● And many others
PUNDIT7
PUNDIT 7 can be used in the laboratory or on site to investigate uniformity; cavities; cracks; fire/frost damage; delamination; deterioration and strength.
--------------------------------------------------------------------------------
Transit Time Measurement
● Range: 0.1μs to 6553μs
● Autoranging between two scales:
0.1μs to 999.9μs
1.000ms to 6.553ms
● Resolution: 0.1μs
Display
● Type: 64×128 dot graphics blue LCD with white LED backlight.
● Viewing area: 56mm×38mm
● Settings/status: Displayed on screen.
● Signal strength: Moving bar indication of signal strength. Numerical value from serial port.
Transmitter
● Energising pulse: 1000V, 750V, 500V, 250V
● Pulse width: ＜1.0μs
Receiver
● Bandwidth (-3dB): 10kHz to 1.25MHz
● Sensitivity: 250μV
● Impedance: 500kΩ
Outputs
Rear Panel BNC Connectors.
●Oscilloscope: Received signal with 10x amplification.
●Time base sync pulse: IV positive pulse
●Analogue: Rectangular pulse with a length equal to the non-zeroed transit time.
●Serial Port: RS232 9-pin D-Type connector.
●Real-time clock for date-stamping of all readings.
●Full control from PC for all settings.
Power Supply
●Battery: Internal rechargeable NiMH battery pack with capacity for over 12 hours continuous use.
●Charger: Built-in charger.
●Mains: 85-265Vac 50/60Hz auto sendsing power supply.
Environmental
●Operating Temperature Range: 0℃-40℃
●Instrument dimensions: 105×220×230mm
●Instrument weight: 1.8kg
●Shipping weight: 5kg net, 6kg gross
PUNDIT 7 KIT:
Order code: PC1012
The PUNDIT 7 is supplied as standard with:
●Two 54kHz transducers.
●Calibration Bar.
●Two 3m transducer cables.
●RS232 serial cable.
●Mains cable.
●Ultrasound couplant.
●Operating Manual,
Technical Reference
Manual, Bibliography and
Application Notes on CD.
●Carrying bag for easy use on site. Order code: PC1012C
●Transducers ranging from 24kHz to 1MHz in frequency - see separate data sheet.
●A range of amplifiers and attenuators to cover all applications.
●Cables of any length up to 30m.
●Couplants available to suit all testing applications.
